Epoxy Flooring in Elsa, TX

Epoxy flooring in Elsa usually goes over concrete that has already lived a long life. The town was laid out in 1927 when the Texas and New Orleans Railroad arrived, and it was incorporated in 1940. Three years later, Carl Roetelle opened a family canning plant here that became the Ro-Tel brand of tomatoes and green chiles. Elsa has added only a little housing since then. The census counted 1,754 housing units in 2000 and 1,859 in 2020, so most of the slabs in town have been around for a while.

What older slabs tend to have

When we walk an Elsa garage, we often find layers of history on the floor:

• Old paint or a worn coating that is peeling at the edges
• Hairline cracks and a few wider ones
• Pitting where the top layer of cement has worn away
• Oil stains from decades of parked cars

None of that rules out a new floor. It does mean the prep takes longer than on a new slab.

Our restoration order

1. Strip loose paint and old coating with diamond grinding. 2. Open the full surface so the new base coat can bond. 3. Fill pits, chips and cracks, and grind the patches flush. 4. Coat with the system you choose, usually flake or a solid color with a clear topcoat.

A compact, close-built town

Elsa covers just 2.1 square miles. In 2000 it had about 3,757 residents per square mile, which is dense for the Valley. Homes sit close together, and space is precious. If your garage is now a den, a gym or a bedroom, a metallic epoxy floor can give it a finished look without laying tile. It goes right on the slab.

Small business floors

Elsa sits on State Highway 107 and FM 88. For storefronts, small kitchens and workshops in town, commercial floor epoxy gives those spaces a sealed surface that mops clean and stands up to carts and foot traffic. We can phase the work to keep your downtime short.

Ten minutes from neighbors

Elsa is 11 miles east of Edinburg and 9 miles north of Weslaco, with Edcouch right next door to the east. We work across this whole corner of eastern Hidalgo County.

Choosing a system for an older Elsa slab

Once the floor is ground and repaired, the choice of system matters. Here is how we usually match them:

• Flake floors hide the small patches and color differences left by repair work, which makes them the most popular choice on older slabs.
• Solid color epoxy gives a clean, uniform look but shows patch outlines more on a heavily repaired floor.
• Metallic epoxy works indoors where a decorative finish is the goal and the slab is fairly sound.
• Polyaspartic topcoats go over any of the above where sunlight reaches the floor.

What older concrete can and cannot hide

A coating seals and evens out the surface. It does not level a floor that has sunk or tilted. If part of your slab has dropped, we will show you where at the estimate and explain your options. In many Elsa garages, the cracks are stable and fill well, and the finished floor looks new.

Get a Free Estimate