Epoxy Flooring in San Juan, TX

Epoxy flooring in San Juan usually starts with a family garage that does a lot more than park a car. San Juan had 35,294 residents at the 2020 census, living in 10,070 households, and 8,566 of those were families. That is a high share of family homes. In many of them the garage is also a laundry room, a workshop, a place for a second fridge and the spot where kids leave their bikes.

A floor that takes a beating

A busy family garage collects every kind of spill: oil, soda, paint, fertilizer and whatever gets tracked in from the yard. Bare concrete stains from all of it. A coated floor keeps those spills on the surface, so a mop or a hose cleans them up. For San Juan families we usually suggest:

• A flake system in a mixed color that hides dirt between cleanings
• A textured topcoat so wet floors near the washer are less slippery
• A coated stem wall a few inches up the sides, so mopping does not stain the edges

Keeping the cost clear

Money matters to every household, and incomes in San Juan are modest. We keep our quotes simple. You get one written price that lists the prep, the system and the number of coats. We do not add charges after the work starts. If the budget is tight, we can talk about a simpler epoxy system now, or coating the main bay first and the rest later.

Get a Free Estimate

Churches, schools and community buildings

San Juan is best known for the Basilica of the National Shrine of Our Lady of San Juan del Valle, one of the largest churches in South Texas. The city is also part of the Pharr-San Juan-Alamo school district, with eight elementary schools and two middle schools inside the city. Buildings like these have storage rooms, kitchens, fellowship halls, maintenance shops and back hallways with hard-working concrete floors. We can coat them in sections and on a schedule that works around services, events and the school calendar.

Patios and carports

San Juan sits five miles east of McAllen and ten miles north of the Pharr-Reynosa bridge, and it shares the same long, hot summers. Many homes here have a carport or covered patio as well as, or in place of, a closed garage. Those slabs get afternoon sun and rain blowing in from the side. We use UV-stable coatings with some texture on these surfaces, so they hold color and stay safer to walk on when wet.

How a San Juan job runs

Most single garages here take one day for prep and the base coat and a second day for the topcoat. The steps are the same on every floor: 1. Move everything out and sweep the floor. 2. Grind the full slab with diamond tooling, including the edges. 3. Fill cracks, chips and low spots. 4. Apply the base coat and broadcast flake if you chose it. 5. Scrape and vacuum loose flake, then roll on the topcoat.

We tell you when you can walk on it, when you can put things back and when you can park on it. In the summer, those times are shorter because heat speeds up curing. In a rare cold spell they run longer.

Getting started

We come out, measure, check the slab for cracks and moisture, and write up a price. Call (956) 420-7849 to schedule.