Serving McAllen, Hidalgo County & the western Rio Grande ValleyCall (956) 420-7849
Epoxy Flooring in McAllen, TX

Decorative floors on slab

Metallic Epoxy Floors in McAllen, TX

A seamless, one-of-a-kind finish poured straight over your concrete, for rooms where looks matter most.

  • Free on-site estimates with a slab and crack check
  • Itemized written quote before any work begins
  • Install times planned around Valley heat and humidity

A Decorative Floor for Slab Homes and Dealerships

Metallic epoxy floors are poured coatings with metallic pigments mixed in. As the resin is spread and worked, the pigment moves and settles into swirls, ripples and depth that look like marble, lava or water. No two floors match. In McAllen, they show up in living rooms, kitchens, home bars, offices and retail stores, anywhere a concrete slab is the subfloor and the owner wants something different from tile.

Why slab homes are a good fit

Most McAllen homes sit on concrete slabs, so when carpet, tile or vinyl comes up, bare concrete is underneath. That concrete can be ground and coated directly. A metallic floor is seamless, so there are no grout lines to clean and nothing for spills to soak into. It is also a hard, wipe-clean surface, which suits busy households and dusty conditions.

What happens to the old flooring

Tile has to come up, and so does all thin-set mortar and adhesive under it. Carpet tack strip and glue have to be removed too. Leftover adhesive will show through a metallic floor or keep it from bonding. We grind the slab down to clean concrete, fill old tack holes and cracks, and level low spots before the first coat. The removal and leveling are often the biggest part of the job in an older house.

Cracks under a decorative floor

A metallic finish shows everything under it. USDA soil descriptions show clay soils along the lower Rio Grande that crack and close as they dry and wet, and slabs above them can crack too. We fill and grind cracks before coating, and we talk through whether a crack is stable. A moving crack can reappear through any floor covering, including this one.

Sun and a clear topcoat

A room with large windows or glass doors puts the floor in sunlight. HomeGuide rates epoxy's UV resistance as poor to fair. We finish metallic floors in sunny rooms with a UV-stable clear coat so the colors stay true and the surface holds up to chairs and foot traffic.

Choosing colors

Metallic floors are usually built from a base color and one or two metallic pigments. Silver, pewter and charcoal make a cool, modern floor. Copper, bronze and gold read warmer. Blues and greens are popular in game rooms and bars. We show samples and photos of finished floors at the estimate, but your floor will be its own pattern.

Where metallic floors work

  • Living and family rooms on slab
  • Kitchens and dining areas
  • Home bars and game rooms
  • Offices and waiting rooms
  • Retail stores and salons
  • Show garages

Living with a metallic floor

Use felt pads under chair legs, a soft mat at exterior doors to catch grit, and a damp mop with a mild cleaner. Like any glossy floor, it shows scratches from sand that gets dragged across it, so a mat at the door matters.

What This Covers

A metallic floor job covers removal, prep and every coat through the final clear.

Old flooring and adhesive removal

Tile, thin-set, carpet tack strip and glue ground off to clean concrete.

Crack repair and leveling

Cracks filled and low spots leveled so the finish lies even.

Primer and base color

A primer for bond and a tinted base that sets the floor's tone.

Metallic pour

Pigmented epoxy poured and worked into the pattern.

Clear topcoat

A UV-stable, scratch-resistant topcoat for rooms with sun and foot traffic.

Metallic Epoxy Floors in McAllen, TX

Typical Metallic Epoxy Floor Costs

JobPublished range
Metallic epoxy floor, per sq ft$5 to $12
Professional epoxy overall, per sq ft$3 to $12
Kitchen (100 to 200 sq ft), epoxy$400 to $2,000
Concrete resurfacing if needed, per sq ft$3 to $7
Crack and chip patching$25 to $250
Labor share of the price, per sq ft$1 to $7

National ranges from This Old House (metallic, overall and patching), HomeGuide (kitchen and resurfacing) and HomeAdvisor (labor). Old flooring removal and leveling add to the total, and metallic floors tend to fall at the upper end. Your written estimate is the price.

How It Works

1. Design visit

We look at the slab, talk through colors and check what flooring has to come up.

2. Remove and prep

Old flooring and adhesive removed, slab ground, cracks filled.

3. Pour

Primer, base color and the metallic coat poured and worked by hand.

4. Topcoat and cure

A clear coat goes on, and you get a written time for furniture and foot traffic.

Warehouse & Commercial Floor Epoxy in McAllen, TX

Metallic Epoxy Floors Questions

How much does a metallic epoxy floor cost?

This Old House lists metallic epoxy at $5 to $12 per square foot. Removing tile and adhesive, leveling, and a premium topcoat add to that. We give you a written price after seeing the room.

Can you put metallic epoxy over tile?

We remove the tile and the thin-set mortar under it and coat the concrete directly. Coating over tile risks grout lines telegraphing through and the tile itself coming loose.

Are metallic epoxy floors slippery?

A smooth gloss finish can be slick when wet. For kitchens and entries we can add a fine anti-slip additive to the topcoat or use a satin finish.

How long does a metallic floor take?

Most residential rooms take two to four days including removal and prep. HomeGuide says solid epoxy is walkable in about 18 hours and fully cured in 7 days, so heavy furniture waits a few days.

Get a Metallic Epoxy Floors Estimate

Free design estimates for metallic epoxy floors in McAllen.

Call Now: (956) 420-7849